answersLogoWhite

0

Behind the dashboard

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the little black box on the windsheld next to the mirror on a 2000 buick laSaber the mirror has the temp sensor on it?

might be the rain sensor


How do I change the left rear turn signal bulb on a 2000 buick lasaber?

take of the cover and go get a new bulb and put it in, or go to a dealer and theyll do it


Where is the blend door actuator on a 2002 deville?

my 2000 de ville hides the blend door activator behind the glove box to the left


How do you replace the actuator blend door in 2000 Lincoln ls?

To replace the actuator blend door in a 2000 Lincoln LS, first disconnect the battery to avoid any electrical issues. Then, remove the dashboard and the center console to gain access to the HVAC system. Locate the blend door actuator, typically positioned near the heater core, and unbolt it from its mounting. Disconnect the electrical connector, replace the actuator with the new one, and reassemble the dashboard and console.


Where is the vacuum line for the heater blend door on a 2000 Chevy blazer s- 10?

The heater blend door is not run by vacuum. It is run by an electric actuator.


Where is temperature control valve actuator 2000 blazer?

The temp blend door actuator would be found behind the dash assembly mounted to the HVAC box. Unfortunately the dash needs to be removed to gain access to the actuator.


How do you change the blend door actuator in a 2000 chevy s10 pickup?

The entire dash assembly needs to be removed to gain access to the blend door actuator. Big job, suggest acquiring a shop manual of you plan on doing this job yourself.


2000 dodge ram what is the little motor or gearbox that moves the damper for heat or cool called?

Blend door actuator.


Where is the actuator on a 2000 Taurus and how do you replace it?

Assuming the "actuator" being asked about is the one for the temperature blend door...See "Related Questions" below for lots of detailed information / instructions on replacing


Where is the blend door actuator in 2000 Acura TL and how do you replace it?

The blend door actuator in a 2000 Acura TL is located behind the dashboard, typically on the passenger side, near the climate control system. To replace it, you'll need to remove the lower dash panel and possibly the glove compartment for better access. Disconnect the electrical connector, unscrew the actuator from its mounting position, and then install the new actuator by reversing the removal steps. Make sure to test the new actuator before reassembling the dashboard components.


Where is the temperature actuator located on 2000 S-10 pick-up?

The temperature blend actuator is located behind the dash assembly. Unfortunately the entire dsah assembly must be removed to gain access to it.


Where is the heater control valve on a 2000 s10?

The temperature blend door and actuator is located behind the dash assembly. The dash assembly needs to be removed to gain access to the blend door assembly.