You can find the 2004 Oldsmobile blend door behind the passenger side kick plate. Remove the kick plate to access the blending door.
4x6
it is in the fuse panel in the drvers door jamb .gmjim
Could be,a stuck open thermostat,low on coolant,plugged heater core,faulty temp blend door actuator,
No, the Oldsmobile model was dropped by GM in 2004. The final production day for Oldsmobile was April 29, 2004. The division's last car built was an Alero GLS 4-door sedan, which was signed by all of the Olds assembly line workers. It is on display at the R.E. Olds Transportation Museum located in Lansing, Michigan.
No.
On the 2004 4-door Alero (cannot vouch for any other year or body type) the driver's door switch is integral to the door-lock mechanism. You must remove the door panel to access this mechanism.
To replace the blend door in a 1998 Oldsmobile Aurora, first disconnect the battery and remove the dashboard trim to access the HVAC controls. Then, take out the heating and air conditioning unit to reach the blend door assembly. Remove the old blend door and install the new one, ensuring it is properly aligned. Reassemble the HVAC unit, reconnect the battery, and test the system to ensure it operates correctly.
Most of them are visible if you drop the glove box door.
two
How do I take the back panel off
The blend door is electrically operated and the only way I know of to access it is to remove the dash board assembly.
The Blend air door is located inside the HVAC housing under the dash. Dash has to be removed to access.