answersLogoWhite

0

The Turn Signal 'blicker' relay is located on the same bracket that holds the ECM and other relays, like the Main relay, Fuel relay, and Horn relay. The fuses are also attached to this same main bracket. The 'blicker relay' is the three-pronged relay in the center and it is not easy to see nor replace from under the dash. Easier way to replace the blicker relay is to remove the left dash radio speaker cover and then remove the speaker. Then remove the two bolts (that also can be unscrewed with a Phillips ( "+" pattern) screwdriver) that hold the entire bracket that the ECM and all the relays are attached to. INSURE THE BATTERY IS DISCONNECTED to prevent blowing the expensive ECM ! Then slide the entire assembly forward towards the firewall and disconnect the connectors (do not force connectors off because some, like the ECM connectors, have plastic clips that have to be depressed while wiggling the connector free). Unscrew the fuse box to be able to remove the entire bracket assembly and you can then easily replace any relay or even the ECM.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where do you buy a fuel pump relay for a 1990 Geo Tracker?

Where can i buy a fuel pump relay for 1990 1.6 geo tracker


Where is turn signal relay Geo Tracker?

Honey, the turn signal relay in a Geo Tracker is usually located under the dashboard on the driver's side. You might have to do a little yoga to reach it, but it's there. Just follow the clicking sound when you turn on your blinker, and you'll find that little bugger in no time.


Does the Geo Tracker have air bags?

does 1990 geo tracker have air bags


Where is the starter relay on a 1997 Geo Tracker?

How cha~ge oil tra~smisio~ of a geo tracker 95


Will a fivespeed trans out of a 1990 Geo Tracker fit a 1995 Geo Tracker?

Yes it should.


Rebuilding manual transmissions for 1990 Geo Tracker?

i want to know how to rebuild a manual transmission for a 1990 Geo Tracker 4x4


What is the firing order for a 1990 Geo Tracker?

Go to Google.com and type in the words "1990 Geo Tracker firing order" and it will get you to a site that will tell you.


Where is your IAT sensor on your 1990 Geo Tracker?

The 1990 Geo Tracker IAT sensor is located on the top of the transmission. The IAT sensor will be near the back of the transmission.


90 Geo Tracker spark plug gap?

0.028 geo tracker 1990, 8 valves 2 doors


What are the timing belt alignment specifications for a 1990 Geo Tracker 1.6 engine?

what is the timing specs for a 95 geo tracker


Who manufacturers the engine in a 1990 Geo Tracker?

Suzuki.


Where is the starter relay on a 1992 Geo Tracker?

inside the fuse/relay center probably under the hood