on top of the passenger's feet untder the glove box has 2 5.5 mm bolts and 2 connectors coming out of it.
Blower Resistor is located near the passenger side floor. There is a black cover over the blower housing. Remove the cover and you should see it. You may need to pull the carpet back to get access to the resistor. Also be sure to have a
Recommend you check the blower motor resistor.
If you are referring to the blower motor resistor then it is inside mounted on the evaporator case.
There is a removeable panel below the glovebox. It is in front of the blower motor against the firewall. It has a wire connector from the loom and then it plugs into the blower motor
resistor for fan blower is in back of glove box, beside the blower itself.
faulty blower motor resistor
If you are referring to the blower motor speed, and only the highest setting works, then the problem is a bad Blower Motor Resistor Pack.
I would look into the blower motor resistor module
you need to repleace the blower motor resistor under the das on the passenger side
There is only one blower motor resistor and it is located in the evaporator housing.
Replace the blower motor resistor.
heat not working