It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
The front control module is part of the under hood fuse box on a Chrysler 300.
The front control module is part of the under hood fuse box on a Chrysler 300.
attached to or adjacent to the fuse block assembly.
The body control module is under the dash on the driver side.
It is located in front of the left front tire. Remove the inner fender liner to access.
No,
The logic control module on a 1995 Chrysler Concord 3.3 liter is on the passengers side. it is located underneath the dash.
The transmission control module is inside the driver side fender, in front of the tire.
Under the lower left of the dash. behind the under dash fuse box.
Under the lower left of the dash. behind the under dash fuse box
The relay switch on a 1997 Chrysler Town and Country mini van is located on the front bumper reinforcement. It is controlled by the PCM (Powertrain Control Module).
it is located on the side of the air cleaners housing the one that say ignition control module in all chryslers car