Mounted somewhere on the brake pedal lever, or possibly a pressure switch on the master cylinder, depending on the vehicle.
It does not have a sensor, It has a switch and it is mounted just above the brake pedal.
There is no brake light sensor. There is however a brake light switch. It may be mechanical, which would be located somewhere on the brake pedal lever. It can be bad or just out of adjustment. It can also be a pressure switch located on the master cylinder.
Faulty or over sensitive parking brake switch or sensor.,
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.
under ure brake pedal u have a brake switch simple fix.
The red brake light comes on when the p brake is set, the switch for the p brake is faulty, the brake fluid level is low, or the brake fluid level switch is faulty. If the abs light is also on, you will have codes in the abs computer too for an electrical failure of a sensor or switch..
where is brake light switch
All brake light sensors are switches connected to the brake pedal. its a switch that is mounted on the front of the pedal on the top.
brake light switch is above the brake pedal under the dash
it means your emergency brake, or hand brake is set. if the brake is released, check cables and sensor. could also be the switch or sensor.
You might need to replace the back-up light sensor, located under the dash, by the brake pedal. The correct term is "brake light switch" instead of "back up light sensor." And yes, it is located above the brake pedal.
its probably your brake light switch. jiggle the little sensor connected to the top of the brake pedal.