0
CRANKSHAFT POSITION SENSOR
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing Crankshaft Position Sensor The bottom of the sensor sits above the drive plate
REMOVAL
Disconnect electrical connector from crankshaft position sensor.
Remove sensor mounting screw. Remove sensor.
INSTALLATION
Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque.
Connect electrical connector to crankshaft position sensor.
What else can I help you with?
What is cmp or ckp on an 2000 Dodge Intrepid?
CMP : camshaft position sensorCKP : crankshaft postion sensor.CMP : camshaft position sensorCKP : crankshaft postion sensor.
Where is the camshaft position sensor located on 2001 Dodge Intrepid?
Front of the engine, points at the driver side cam sprocket.
Can you swap a 2000 intrepid 2.7 into a 2006 Dodge charger?
No. The camshaft position sensor and crankshaft position sensor tone wheels are different. It may fit, but the engine will not run.
What does a code P0340 mean on a 2003 Dodge Intrepid?
Trouble code P0340 means: Camshaft Position Sensor A Circuit (Bank 1 or single sensor)
2006 dodge durango camshaft position sensor location?
The 2006 Dodge Durango camshaft position sensor is located on the back end of the head. The position sensor should be labeled as such.
Where is the camshaft sensor located in a 2000 Dodge Intrepid with a 2.7 engine?
2.7 L
Where is the camshaft position sensor located on a 2006 dodge stratus?
Where is a camshaft position senser located on a 2006 dodge durango/
1999 Dodge Intrepid heater is not working very well?
1999 dodge intrepid is not starting I change crank and camshaft sensor and it stall will not start what can i do next.
Where is the camshaft position sensor in a 95 dodge 2500 3.9?
The camshaft position sensor on a 95 Dodge 2500 3.9 is located inside the distributor, under the rotor.
Where is the camshaft position sensor on a 2001 5.2 Dodge Ram sport?
The camshaft position sensor on a 2001 Dodge Ram 5.2 is inside the distributor, under the rotor.
Where is the camshaft sensor located on a 2004 Dodge Intrepid 2.7 engine?
Front left of engine.
Where is the camshaft position sensor on a 1994 Dodge Intrepid?
On the driver's side, in the timing cover in front of the valve cover, if it's a 3.5L. Please specify if its a 3.3 or 3.5L
