Look on the engine side of the firewall in front of the clutch pedal. You should see the reservoir there.
In the clutch fluid reservoir located under the hood, on the drivers side firewall.
on the bottom of slave cyl,use Allen key
The clutch fluid reservoir is located on the firewall close to the brake master cylinder. You can visually see the level unless the reservoir is to dirty.
To change the master cylinder on a 1993 Chevy Cheyenne 1500 pickup with a hydraulic clutch, first, disconnect the negative battery terminal. Then, remove the clutch fluid reservoir cap and drain the fluid. Unbolt the master cylinder from the firewall, disconnect the push rod from the clutch pedal, and remove the hydraulic lines. Install the new master cylinder by reversing these steps, ensuring all connections are secure and refill the reservoir with the appropriate hydraulic fluid.
where is the transmission censor located on a 1997 Chevy cheyenne truck
It may use the brake fluid
It is made on to the clutch slave cylinder that mounts on the side of the transmission.
It is by the brake master cylinder
in the exhaust system
if the clutch is hydraulic operated, bleed the cluth if it is mechanical cluth, adjust the linkages
Remove reservoir cap and pump the clutch pedal until air bubbles rise and pedal feels firm.
no adjustment on the 5speed manual transmission with overdrive. hydraulic clutch