Not used. It is driven by the PCM
Its under back seat
behind the top rear seat
A Chrysler Sebring does not have a reset switch.
No such part exists on a Sebring, the fuel pump is computer controlled with a relay.No such part exists on a Sebring, the fuel pump is computer controlled with a relay.
If the Chrysler Sebring won't start after going through a puddle, the problem is probably that the starter relay switch got wet. This is not a common thing but if the starter relay was bad to begin with, moisture will make the problem worse. The starter relay is located on the starter.
1997 chrysler sebring does not have a fuel cut off switch. Fuel pump is controlled by a relay located on the firewall right above the battery. Its on a bracket that holds 3 relays. The relay you are looking for is in the middle. Also called a auto shut down relay
No
The radiator fan relay is located behind the head light on the drivers side.
If you are looking for a reset switch, Chrysler does not use those.
The fuel pump relay on a 2002 Chrysler Sebring LXi is located in the power distribution center (PDC), which is usually found in the engine compartment. To access it, open the hood and look for a rectangular black box near the battery. The relay is typically labeled on the underside of the cover, making it easier to identify.
Try looking in your owners mannuel