The drain plug on a 1998 GMC Sonoma is located on the oil pan, which is situated underneath the engine. To access it, you'll need to lift the vehicle safely and look for a large bolt or plug at the lowest point of the oil pan. It's typically a hex or square shape, allowing you to use a socket or wrench to remove it for oil changes. Always ensure to have a drain pan ready to catch the old oil when you remove the plug.
17mm (works for a 1998)
plain and simple, there isn't one
Bottom of the oil pan.
That's right, no drain plug back there. To change the lube you need to remove the diff cover.
Which drain plug are you trying to locate?
To drain the radiator on a 2001 GMC Sonoma, first ensure the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Place a drain pan under the radiator, open the drain plug, and allow the coolant to fully drain out. After draining, close the plug securely, and refill the radiator with fresh coolant. Be sure to dispose of the old coolant properly, as it is toxic.
It doesn't have a drain plug. You have to remove the oil pan to drain.
The radiator drain plug for a 2003 GMC Sonoma truck is typically located at the bottom of the radiator on the driver's side. It may appear as a small plastic or metal plug that can be turned by hand or with a tool. To drain the coolant, ensure the engine is cool, then open the drain plug to allow the coolant to flow out into a container. Always remember to properly dispose of the coolant afterward.
For a 1996 GMC Sonoma, the oil drain plug typically requires a 15mm or 5/8-inch wrench. It's best to check your vehicle's manual or inspect the drain plug directly, as variations can occur based on the engine type or any modifications. Make sure to have the correct size to avoid stripping the plug.
The automatic transmission does not have a drain plug. You remove the pan to drain the fluid.
Should be found at the lower rear passenger side of radiator.
The radiator drain plug on a 2002 GMC Sonoma with a 4-cylinder engine is typically located at the bottom of the radiator, on the driver's side. It is a small, plastic or metal plug that can be opened to drain the coolant from the radiator. To access it, you may need to remove any protective covers or shields. Always ensure that the engine is cool before attempting to drain the radiator.