There is not an EGR valve on a Ford 2.0 DOHC engine. It was taken out when Ford engineers figured out they could retard the exhaust timing through the camshaft. They call it Variable Camshaft Timing. I just finished reading about it on a tech tip web site. The web address is: www.asashop.org/autoinc/july2002/techtips.cfm
Where is the PCV valve located on a 4 cyl ford contour and will this if replaced will let my service engine light go off?
Locate pcv valve on 1995 ford contour
nope has to be the 32 valve engine
where is the oil filter on a ford contour, 1999
where is egr valve on 1998 ford contour
According to the 1999 Ford Contour Owner Guide : With engine oil filter change : The 2.0 litre four cylinder engine takes : ( 4.5 U.S. quarts of 5W-30 )
Where is the oil filter located in a 1999 Ford Contour
On a 1999 Ford Contour , 2.5 litre V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
The transmission drain plug on a 1999 Ford Contour 4 cylinder engine is located on the front of the transmission, behind the engine. It is used to remove the oil fluid during fluid changes.
could be valve cover casket leaking
The Schrader valve on a 1999 Ford Contour is located on the fuel rail, which is part of the fuel injection system. You'll find it near the engine, typically on the driver's side, where the fuel lines connect to the fuel injectors. It looks similar to a tire valve and is used for checking fuel pressure or relieving fuel pressure before servicing the fuel system.
how do you change a thermostat for a 1997 Ford Contour