where is the evap canister on 1998 s-10 pick-up.
It should be under the rear of the truck, behind drivers side rear tire..
Where is evap canister located on a 1996 chevy s10 blazer? It should be found above the rear axle on the drivers side, mounted to the inside of the frame rail.
EVAP charcoal canister.
The EVAP Charcoal canister.
Your Chevy1997 S-10 came with an owners manual when you purchased it. If you look in it, you should find a diagram of an evap canister. This will help you navigate things easier.
Above the rear axle on the drivers side. Remove the left rear tire to help gain access to it.
its on the driver side, next to the back tire. you will find it attached to outside of the frame.
It should be found above the rear axle, on the drivers side, mounted to the frame.
mine is under the bed towards the back of the frame. its a black box with a hose going to a sensor, and another to your gas tank.
There are 2 I believe. One is above the rear end mounted to the bed. The other I believe is mounted to the canister just a bit towards the drivers side rear wheel on the inside of the frame not to far from the other evap
To fix the EVAP (Evaporative Emission Control System) on a 2010 S10 truck, first, use an OBD-II scanner to identify any trouble codes related to the EVAP system. Common fixes may involve replacing a faulty gas cap, repairing or replacing cracked hoses, or fixing the purge valve. Additionally, check the EVAP canister for blockages or damage. After repairs, clear the codes and take the vehicle for a drive to ensure the system is functioning properly.
how do you change the oil pump on a 1991 s10 pickup
where do i put coolant in for 1994 Chevy s10 pickup