it should be located in one of your fuze panals
where is my singnals and hazard flalsher on my 2004 Chevy Monte Carlo
The 2001 Monte Carlo emergency flasher relay switch and the turn signal flasher relay switch are the same. The flasher relay switch simply plugs in and out.
To replace the flasher on a 2004 Chevy Monte Carlo, first locate the flasher relay, which is typically found under the dashboard near the steering column or in the fuse box. Remove the old flasher relay by simply pulling it out of its socket. Insert the new flasher relay into the same socket, ensuring it is securely in place. Finally, test the turn signals to confirm that the new flasher is functioning properly.
The 2002 Monte Carlo blinker flasher relay switch is located beneath the drivers side dashboard. The blinker flasher relay switch will be above the brake pedal.
Replace the flasher relay.
The flasher relay on a 1995 Chevy Monte Carlo is typically located under the dashboard, near the steering column. You can find it by looking above the brake pedal or in the fuse box area. It's a small, rectangular component that may be secured in a socket. If you're having trouble locating it, consulting the vehicle's service manual can provide specific guidance.
Part of the hazard warning module
If none of them work it is a bad Flasher Relay. Replace it.
96
under the hood ,behind the battery.
Hi, I just replaced the flasher relay on my wife's 2005 Monte Carlo. The flasher relay is not a traditional relay in the sense that it actually is integrated into the emergency flashers button on your instrument panel, above the ignition. The part cost $45 at the dealership, and was a bit tricky to install. You'll have to remove several screws that hold the instrument board in place. It's also a pain in the butt to remove the actual flasher relay, once you get to that point.
The flasher relay switch is located beneath the dashboard, on the drivers side. The flasher handle is located on the left hand side of the steering column.