Ford Mondeo 1998cc TDCi 2002 Model. Diesel cut off switch is on passenger left hand side foot well.
ford originally did not produce the 1994 ford mondeo with fuel cut off switch. it was later improved in 2005 on the dashboard, after numerous deaths of drivers who died in fuel related fires. unlucky mate :/
On a 2002 Ford Taurus : The fuel pump shut off switch ( inertia switch ) is on the passenger side of the trunk , behind the trunk liner ( there is an access hole )
In a 2009 Ford Mondeo, the inertia fuel cut-off switch is typically located in the trunk, on the left side near the rear wheel well. It may also be found under the dashboard, near the driver's side. This switch is designed to cut off fuel supply in the event of a collision. If you need to reset it, simply press the button on the switch after ensuring the cause of activation has been resolved.
In a Ford Mondeo MK3, the fuel cut-off switch, also known as the inertia switch, is typically located in the trunk area, on the right side behind the trim panel. You may need to remove the panel to access it. This switch is designed to cut off the fuel supply in the event of an accident. Always consult the vehicle's manual for precise location and instructions.
Yes.
On a 2002 Ford Mustang : The fuel pump shut off switch ( inertia switch ) is in the trunk It is on the drivers side of the trunk , behind the trunk liner , near the tail light ( there is an access hole and the switch is to the left of the access hole )
under the wheel
under car by fuel tank......
On a 2002 Ford Explorer : Yes , if you mean the fuel pump shut off switch ( inertia switch ) It's located in the front passenger footwell , by the kick panel
According to the 2002 Ford Ranger owners manual , the inertia switch ( fuel pump shut off switch ) is located in the front passenger footwell by the kick panel
The fuel cut-off switch on a Ford Mondeo TDCi is typically located in the engine compartment, near the battery or on the bulkhead. It may also be found near the fuel pump or along the fuel lines. To reset it after a collision or if the engine fails to start, you can usually press the switch down until it clicks. Always refer to the vehicle's owner manual for the exact location and instructions specific to your model year.