Just replaced the sending unit today and the fuelp pump is all one unit in the gas tank. There are 3 straps to lower the tank pay attention to the hoses and wires and raise the tank with a jack of some kind. Undo the straps and lower the tank slowly. Unhook hoses and wires and lower tank. Unscrew the ring holding pump in place and remove the pump/sending unit from the tank. Then put everything back together. If you are having a hard time getting wires off check sometime there is a blue pin stopping the wires from coming undone. Good Luck. Took me about an hour my problem was I had 7/8 tank of gas and it was really heavy. Try and do it with an empty tank.
The oxygen sensor is located in the exhaust manifold near the firewall. It is easier to get to the sensor from under the vehicle.
The sending unit and the fuel pump are all one module in the gas tank.
they are located in the exhaust system Where ? how many 02 sensors on a 2003 Pontiac Montana
The fuse panel in a Pontiac Montana is located in the passenger door. It is located on the same level as the glove box.
Where
where is the freeze plug located in a 2000 pontiac montana mini van
Cam sensor location 02 pontiac montana 3.4
The ECM is located on the driver's side, under the hood on a 2003 Pontiac Montana. It is on the driver's inner fender.
No
on the undercarriage...
on the front of the engine
The 2003 Pontiac Montana EGR valve is located on the firewall. The valve will be on the driver side of the firewall.