The intertia switch is located on the drivers side of the firewall to the left above the brake pedal. Pull up the red button, gently. Don't forget to push it back down after you are finished working on the fuel system.
Passenger side lower kick panel
Fuel pump inertia switch tripped , fuse blown for electric fuel pump , bad fuel pump relay , bad wiring connection
driver side next to brake under carpet. * Mine is on the passenger side; under dashboard and has a white RESET botton on the top.
The 2000 Ford E1 50 turn signal flasher relay switch can be found beneath the drivers side dashboard. The turn signal flasher relay switch will be about the brake pedal.
wht type battery do you use
Reset the inertia switch in the passenger kick panel. The button is facing down and may not be visible. It will click when reset.
i need a full picture view for the removal and instillation for a radiator for a 1989 ford e150 van 5.0 engine
On my 1990 Ford E150 4.9L I6, the neutral switch is below the steering wheel, half way down the steering column, on the top side of the steering column. Just keep unscrewing things until you can access the switch, then remove the switch.
need timing on 89 e 150 van
the relay is located in the engine compartment fuse box which is located just above the steering box on the right side of the van. open the box and the relay on the center will be the pump relay
more than likely in steering column
There should be a foot switch to the left of the gas pedal.