inside of the frame on the drivers side just in front of the front tank.just follow the fuel lines coming off of the front tank
inside the in tank fuel pump.
The fuel tank selector valve on a 1993 Ford F150 with a 4.9L engine is on the left side frame rail under the driver side floor pan forward of the side fuel tank in-line on the fuel lines. Follow the fuel lines from the side tank forward until you see the selector valve. The valve will have at least three fuel lines and one electric plug with wires plugged into it.
On a 1996 Ford F-250 Powerstroke, the fuel selector valve is typically located along the frame rail, near the fuel tank. It can be found on the driver's side, between the fuel tanks and the fuel lines. Accessing it may require removing some undercarriage components for better visibility. Always consult the vehicle's service manual for specific instructions and safety precautions.
On a 1996 Ford F-250 XL 4x4 with dual fuel tanks, the fuel tank selector valve is typically located on the frame rail, near the rear of the vehicle. It is positioned between the two fuel tanks and is connected to the fuel lines that supply fuel to the engine. Accessing it usually requires lifting the vehicle for better visibility.
egr valve location on a 1997 ford ranger 23l
The PCV valve on a 1996 Ford Escort 1.9L is located between the engine and the radiator. It is near the vacuum hose.
On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover
Underneath Driver side Cab as it meets the bed and it looks like this
Attached to the frame on the driver side just about under where the driver would sit.
On top of the valve cover , near the rear of the cover
Ford hid the PCV underneath the intake manifold, in the rear of the passenger side valve cover.
Where is the PCV valve located on a 4 cyl ford contour and will this if replaced will let my service engine light go off?