To the left of the emergency brake in a panel
If you replaced the flasher on your 1999 Mercury Cougar and your turn signals are still not working, you should check the turn signal fuse. This fuse is located under the dashboard on the driver's side of the vehicle to the left of the steering column.
in the steering colume there is a little box connected to turn signal you replace that little box but you have to take lower colume off.
it is located on top of your steering wheel column
The emergency flashers for the 1997 Mercury Cougar are on top of the steering column behind the wheel.
On a 1995 Mercury Cougar, the flasher fuse is typically located in the fuse box under the dashboard on the driver's side. To access it, you'll need to remove the cover of the fuse box, which is usually found near the steering column. The specific fuse for the turn signals and hazard lights is often labeled in the fuse box diagram. If you're having trouble locating it, consult the owner's manual for detailed information.
My 2000 E320 fuse box for the turn signals is located in the panel to the left of the sterring wheel. You need to open the driver's door to see the panel. There is a card inside that provides the fuse location. We replaced the fuse for the turn signal position, however our turn signals still don't work- any ideas?
The 2003 Mitsubishi turn signal fuse can be found in the fuse box. The turn signal fuse will be in the second column, fourth from the top.
under the hood you should find a small 10A or 15A fuse. There is a separate fuse for the trailer turn signals.
if only one turn signal is out your looking at a blown bulb not a fuse as the turn signals are on one fuse if it blew none of your signals would work but to check anyway look in manual to find which fuse is turn signal fuse located fuse box and pull it
In a 1996 Cadillac STS, the turn signal fuse is located in the fuse box, which is typically found under the dashboard on the driver's side. You can identify the specific fuse for the turn signals by referring to the fuse diagram that is usually located on the inside of the fuse box cover. If the turn signals are not functioning, it's a good idea to check this fuse first, as it may have blown and need replacement.
In a 1997 Ford van, the fuse that typically controls the turn signals is located in the fuse box under the dashboard. It is usually labeled as "Turn Signals" or "Hazard." If the turn signals are not functioning, check this fuse first and replace it if it is blown. Always refer to the owner's manual for the exact location and specifications for your particular model.
it is a small rectangular-shaped switch unit located in a clip on a bracket to the right of the steering coulumn