YOUR IAC ON A 95 S10 BLAZER 4.3L TBI VIN "W" WILL BE LOCATED ON YOUR RIGHT SIDE OF THE PLENUM. IT IS THE SENSOR THAT KINDA SITS UP HIGH. YOU'LL KNOW YOU GOT THE RIGHT ONE ONCE IT'S OFF. THE SENSOR LOOKS LIKE A CONE SHAPED SPRING. 2 TORQUE BOLTS AND IT'S REMOVED.
The IAC (Idle Air Control) is located in the base of the throttle body.
side of the throttle body to your right facing the engine
Unplug the wiring harness from the iac. Using a adjustable or a 1 1/4" wrench remove the iac.
Code p0507 2001 chevy s10 replace upper intake, iac, tps still have problem
if you mean iac motor, it is located on the upper intake at the throttle body. if you mean iac motor, it is located on the upper intake at the throttle body.
The IAC is located on the passenger side of the throttle body toward the rear. It screws into the housing using a 1" wrench.
YOU WILL DIE! have you check your IAC ??
There isn't a separate IAC motor. The electriconic throttle body assembly has a built in motor that opens and closes the throttle plate. The throttle body is not repairable, it must be replaced.
IAC - in other words idle air control valve
it is a small electric motor on the side of the throttle body
probably got a bad IAC motor
where is the iac motor located in a 1997 ford f-150 pick-up (6 cylinder, standard). Also, what steps are taken in order to take out the old one and replace with a new one.