There is no interior fuse panel. The panel is in the engine compartment behind the airfilter
Removing the interior rear door panel from the 2002 Chrysler PT Cruiser involves locating and removing the six screws covered with plastic covers. Once these are removed, the door cover can be gently pried off.
No.
the body controller is a part of the interior fuse panel on the drivers side
The 2007 Chrysler PT Cruiser OBD 2 port is under driver side dash next to kick panel
No the tank has to b e removed.
The rear door panel on a PT Cruiser can easily be removed by unscrewing the screws at the top and bottom. The exact location of the screws can be found in the user manual.
The "PT" in "PT Cruiser" stands for "Personal Transportation," as expressed at the 2002 PT Cruiser owners event at the Chrysler Headquarters in Auburn Hills Michigan. The event included a question and answer session with Chrysler Engineers from the PT Cruiser team where this question was raised and addressed. It does NOT stand for "Panel Cruiser" as the "woody" panel look was not added as factory option until a couple of years after the vehicles launch.
Dealer, salvage yard, etc
It is behind the panel at the rear passenger side of the interior.It is behind the panel at the rear passenger side of the interior.
there are 2 one behind the battery the other under the dash panel driver side
in the fuse panel box
The interior fuse panel is located behind the coin holder pull out drawer, which is on the lower left side of the dashboard.