there are 2 pre-cat sensors located on each exhaust manifold and 1 after cat. if you scanned it to read code precat sensors will be bank one or bank two,the other is just for cat.
It is on the transfur case tail shaft.
It depends on if its 4x4 or 2x4. On the 2x4 version its located on the rear of the transmission. If its 4x4 it is located on the transfer case.
From 2000 and up. Nothing under 2000 will work.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
The speed sensor is located on the transmission on tail shaft behind the transfer case
2000 jimmy 4.3ltr v6. were is the o2 sensor bank 1, sensor 3
one on each cylinder bank and then before and after the cat converter. there all on the exhaust.
they say 55 is the rated speed
You can find a diagram for the vacuum system in a 1995 Blazer 4x4 will be located in the Blazer service manual. The manual can be purchased in most auto parts.
drivers side just in front of transfer case the sensor is yellow the only one in that area.
No
Try replacing the engine coolant sensor.