The OBD connector is under the dash on the driver side.
In a 2007 Jeep Compass, the OBD-II port is located under the driver's side dashboard. Specifically, it can be found near the steering column, just above the brake pedal. You may need to kneel down or use a flashlight to see it clearly, as it is positioned towards the back of the dash area.
The diagnostic connector is under the dash on the driver side.
To add Freon to a 2007 Jeep Compass, first ensure the vehicle is off and parked on a level surface. Locate the low-pressure service port, which is usually on the larger AC line, and attach the refrigerant can's hose to it. Start the engine and turn the AC to the maximum setting. Slowly release the refrigerant into the system while monitoring the pressure gauge, ensuring it stays within the recommended range for optimal cooling.
It is under the dash on the driver side.It is under the dash on the driver side.
Under the dteering wheel covers 10pin plug
All OBDII ports are located within 1 foot of the steering column, look just under the dash.
The OBD port is under the dash on the driver side.
The 1988 Jeep Cherokee air conditioning low pressure port is located on the air conditioning compressor. The low pressure port will be on the right hand side of the compressor.
witch is the low side on a 95 jeep 4.0
The OBD port is under the dash on the driver side.
Jeep Grand Cherokee cooling system through the low port on the air conditioning compressor. Connect your Freon bottle to the port and discharge.