In a Mercury Mariner, the oil filter is typically located on the engine block, usually on the lower side or the side of the engine, depending on the specific engine model. To access it, you may need to raise the vehicle and look beneath it, as it can be challenging to see from the top. Always refer to the owner's manual for exact specifications and locations, as they can vary between different model years and engine types.
Purolator builds a filter that will fit your Mercury. 4 cylinder uses the PL10241 V6 uses the PL24651
The oil capacity of a 2006 Mercury Mariner with a 2.3-liter engine is approximately 4.5 quarts (4.3 liters) when using a standard oil filter. If you're using a larger filter, the capacity may increase slightly. Always refer to the owner's manual for the most accurate specifications and recommendations.
According to the 2009 Mercury Mariner Owner Guide : With engine oil filter change : The 2.5 liter four cylinder engine takes ( 5.3 U.S. quarts ) The 3.0 liter V6 engine ( 6.0 ) * 5W-20
According to the 2007 Mercury Mariner Owner Guide ( 5W-20 ) -------------------------------------------------------------------- With engine oil filter change : The 2.3 liter four cylinder engine takes ( 4.5 U.S. quarts ) and the 3.0 liter V6 engine takes ( 6.0 )
If it is a 2 cycle engine, it has no oil filter. If it is a 4 cycle engine, the filter is located under the engine cover.
near the oil filter
According to the 2008 Mercury Mariner Owner Guide : With engine oil filter change : The 2.3L four cylinder takes ( 4.5 U.S. quarts of 5W-20 ) The 3.0L V6 ( 6.0 quarts of 5W-20 )
According to the 2009 Mercury Mariner Owner Guide : With engine oil filter change : The 2.5 liter four cylinder engine takes ( 5.3 U.S. quarts ) The 3.0 liter V6 engine takes ( 6.0 ) * 5W-20
In the car Duhhh..
Answer oil capacity for mercury mountioneer with 4.6 v-8 with filter change ========================================================================= According to the 1999 Mercury MOUNTAINEER Owner Guide : With engine oil filter change : The 5.0L V8 engine takes ( 4.7 litres / 5.0 U.S. quarts of 5W-30 )
According to the 2006 Mercury Mariner Owner Guide : With engine oil filter change : The 2.3 liter four cylinder engine takes ( 4.5 U.S. quarts of 5W-20 ) The 3.0 liter V6 takes ( 6.0 of 5W-20 )
right above the oil filter on the transmission side of the filter mount