It is accessible on the passenger side of the vehicle once you remove the oil pan.
In a 2005 Mazda 3, the number 1 cylinder is located at the front of the engine, on the driver's side. This arrangement follows the conventional numbering system used in most inline four-cylinder engines, where the cylinders are numbered from front to back. For the Mazda 3's 2.0L or 2.3L engines, the number 1 cylinder is the first cylinder closest to the radiator.
The clutch master cylinder on a 2007 Mazda 3 is located in the engine bay, on the driver's side near the firewall. It's typically mounted directly to the firewall and connected to the clutch pedal inside the cabin.
On a 2005 Mazda Tribute with a 2.3L 4-cylinder engine, the PCV valve is located on the valve cover. Specifically, it can be found towards the rear of the engine, near the intake manifold. To access it, you may need to remove any components obstructing the view, such as the intake hose. Always ensure the engine is cool before attempting to locate or replace the PCV valve.
It is located on the oil filter housing
The 2005 Mazda MAZDA3 has an inline 4 engine.
The 2005 Mazda MAZDA6 has an inline 4 engine.
The oil filter on a 2005 Mazda 6, v6 is on the front side of the engine block about 8 inches up from the bottom of the engine block. You have to go in from under the car. Don't know about 4 cylinder.
It should be located on the left side of the engine (looking at the headlights), beside the exaust manifold.
The 2005 Mazda MAZDA3 has a 2.0 L base engine size.
The 2005 Mazda MAZDA6 has a 2.3 L base engine size.
The 2005 Mazda MX-5-Miata has an inline 4 engine.
In a 2005 Mazda Tribute, the alternator is located on the front of the engine, typically on the driver's side. It's mounted near the top of the engine compartment, making it accessible for maintenance. To reach it, you may need to remove the engine cover and possibly some other components depending on the specific configuration.