I have 1995 S-10 4.3L: Mine is located in exhaust pipe just before the catalytic converter. Looks like a sparkplug with wires coming out. AutoZone has good info about it, check out http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800bfd04 Only one my truck has.
the air temp sensor should be located on the radiator support behind the grille. Sometimes around the headlight area or attached to the center/ latch supports
YES It is a direct bolt in.
No, just the distributor pick up plate (cam sensor)
The outside temperature sensor on the 2005 Chevrolet Silverado pickup is located in the top of the dash next to the windshield. Look for an area that looks like a speaker but is shaped like a triangle.
The knock sensor is on the passenger side of the motor along the top of the oil pan about half way on the block.
Someone can purchase Chevrolet pick ups from a local car dealership. Someone can also purchase Chevrolet pick ups off of the Chevrolet website itself.
Trouble code P0330 means: Knock Sensor 2 Circuit (Bank 2) Replace the knock sensor
You can obtain a 1995 Chevrolet 1500 pickup truck spark plug wiring diagram from most Chevrolet dealerships. Many auto-parts stores will supply the diagram, without charge.
Slide in under the front of the engine and look at the left bottom side of the timing cover and you will see the sensor. it is bolted in place with 1 10mm bolt.
The first oxygen sensor is on the exhaust tube after the manifold but before the catalytic converter and can be easily removed with an inexpensive O2 sensor removal socket that you can pick up at the parts store when you buy the sensor. The tool is recommended because it has a slot cut in the side for the wires so you wont destroy them or the connector.
No it will not.
Underneath the 1995 Chevy 1500, the cables from the real wheels connect to the cable from the brake pedal. The connection has an adjustment bolt that when tightened will make the brakes tighter.