On a 1993 Ford Bronco, the Powertrain Control Module (PCM) is typically located under the dashboard on the driver's side, near the steering column. It can be found mounted to the firewall or on a bracket. Accessing it may require removing some panels for better visibility and reach.
The PCM for the 89 Bronco is located on the firewall on the driver side. You can access it from inside the cab, behind the parking brake pedal.
the pcm is located along the upper edge of the firewall in the engine compartment..
The Powertrain Control Module (PCM) on a 1994 Ford Bronco is typically located behind the passenger side kick panel, near the footwell area. To access it, you may need to remove the kick panel and possibly some trim pieces. The PCM is a rectangular box with a connector harness attached to it.
In the truck
The PCM on a 1997 Ford E350 is located under the hood on the drivers side. It is toward the back near the firewall.Ê
On a 1993 Jeep Cherokee, the Powertrain Control Module (PCM) is typically located under the dashboard on the driver's side, mounted to the firewall. It can be accessed by removing the lower dash panel. Be cautious when handling the PCM, as it is sensitive electronic equipment.
The PCM in a 1993 Deville gets power from the IGN fuse. the fuse is located in the distribution box under the hood.
in the TRK
think its integral to the ecu
The PCM is located behind the right strut, down low in the firewall. PCM meaning Powertrain Control Module.
The pcm of a 2001 Taurus should be located under the hood. The unit is bolted onto the firewall on the passenger side.
Behind the left kick panel passenger side front. Bolted to the bracket that holds the computer. Its the one with the brown connector.