The radiator cap on a Chrysler Pacifica is typically located on the top of the radiator itself, which is situated at the front of the engine compartment. To access it, open the hood and look for a round cap labeled with a warning about pressure. Be sure to allow the engine to cool before removing the cap to prevent injury from hot coolant.
possibly the radiator cap is not holding pressure, try replacing it
At the bottom of the radiator.
The Chrysler Cirrus was only built from 1995-2000. The radiator cap is located on the housing where the upper radiator hose hooks to the engine.
Under the housing where the lower radiator hose hooks to the engine.
Chrysler Pacifica was created in 2003.
3.5L, under the housing where the lower radiator hose hooks to. 3.8L, under the housing where the upper radiator hose hooks to.
It is the part that the radiator cap and upper hose attach to.It is the part that the radiator cap and upper hose attach to.
To the overflow tank and if the radiator has a cap,you will need to fill it with the engine cold.
Front driver side under the hood, on the top of the radiator.
If it is red or brown it is the transmission cooler (in the radiator) leaking. If it is milky white, internal engine oil leaking in to the cooling system, head gaskets.
To burp the air from the cooling system of a 2007 Chrysler Pacifica, first ensure the engine is cool. Open the radiator cap and fill the radiator with coolant until it's full. Start the engine and let it run with the heater set to maximum, allowing the thermostat to open; this will help circulate the coolant. Keep an eye on the coolant level and add more as needed until no more air bubbles are visible and the coolant stabilizes.
The 2017 Chrysler Pacifica has a 3.6L V6 engine.