0
What else can I help you with?
How do you change the rear main seal on a Dodge Stratus.?
You have to remove the transmission from the vehicle, then remove the flexplate from the crankshaft. The seal is directly behind the flexplate.
Installing rear main seal on '89 dodge D100 with a v6?
I am not sure of how to instal a rear main seal on '89 dodge D100 with a v6.
How do I change the rear main seal in a 1993 dodge 5.9 cummins?
You remove the trans and flywheel. The seal then drives in from the rear.
How do get to the rear main seal on a 2000 dodge avenger?
You have to remove the tranmission and the flywheel.
Why does my 1992 dodge Dakota loose oil pressure stalls?
rear main seal leaking
Where is the crankshaft seal on 1988 dodge caravan?
There is one on each end of the crankshaft. The front main seal is at the pulley and, while the rear main is at the transmission end.
1996 dodge ram sport 1500 how do i change the rear main seal without pulling the motor?
Remove the trasnsmission and you can then replace the seal.
What is the shop time on a 2000 dodge caravan sport rear main seal?
5-6 hours
Do you have to pull the transmission to change the rear main seal on a 1995 Dodge Ram 5.9Lt?
V8 , no. Diesel, yes.
How do you replace rear main seal and oil pump on Ram 1500 5.9L?
You can replace the rear Main seal on the oil pump of your Dodge ram 1505.9 L pickup truck by removing the camshaft bearing. Once the bearing is removed the seal can be removed with a seal puller. Reverse the process to install the new seal.
How long change rear main seal?
Not enough clear information ! - Rear main seal on WHAT - ? ?
How do you change rear main seal on Dodge Ram 1500 5.9?
To change the rear main seal on a Dodge Ram 1500 with a 5.9-liter engine, first, disconnect the battery and remove the transmission by unbolting it from the engine. After that, drain the engine oil and remove the oil pan to access the rear main seal. Carefully pry out the old seal, clean the sealing surface, and install the new seal using a seal installer or a similar tool to ensure it sits evenly. Finally, reassemble the oil pan and transmission, refill with oil, and reconnect the battery.
