The Range sensor inside the transmission (on the valve body) sends a signal to the trans computer(tcm) about gear position. The TCM then sends that signal to the TIPM (under hood fuse box) and it turns the lights on.
The Range sensor inside the transmission (on the valve body) sends a signal to the trans computer(tcm) about gear position. The TCM then sends that signal to the TIPM (under hood fuse box) and it turns the lights on.
1, i have the same car. N/s reverse. O/s is rear fog light. Pull the light switch to activate fog light.
nissan micra 2006. how to change a reverse switch?
ow to replace brack light switch 2006 cadillac cts
That REQUIRES an ENGINE SCANNER to do that.
It is the combination turn signal, high beam, head light switch.
To change the brake light switch on a 2006 Audi A6, start by disconnecting the battery to ensure safety. Locate the brake light switch, which is typically positioned above the brake pedal. Remove the electrical connector from the switch, then unscrew and remove the old switch. Install the new switch by reversing the process, ensuring it is properly adjusted and reconnect the battery to test the lights.
top of brake pedal
According the the Owners Manual for the X3, any malfunction with bulbs inside the lift-gate (which is where the reverse light is located) need to be brought to a BMW dealer.
autozone.com has online manuals you can access for free
1) light bulb burned out 2) switch not turned on 3) switch broken 4) power supply disconnected
It is inside the transmision, it is called the range sensor.
On the bracket that the brake pedal pivots on.