The second battery in a 2002 Chevy Express van is typically located in the engine compartment, on the driver's side near the main battery. It's often used in vans equipped with dual battery systems for added power, especially in extended models or for auxiliary purposes
I think the person means the heater blower motor and not a radiator fan motor
Does anyone know how much does a 2002 chevy express 15 passenger van way
From what I have found from a local dealership the 2002 Chevy Express Van with a 5.7 liter engine and a 3.73 rear axle can tow up to 6600lbs.
Where does the vacuum line lead to from the top of an 2002 Chevy express 1500 van with 5 liter engine
under the battery, remove the battery and battery tray
Yes, if it fits the holder.
To change the dash lights on a 2002 Chevy Express, first, disconnect the negative battery cable to ensure safety. Next, remove the instrument cluster by unscrewing the screws that hold it in place and carefully pulling it out. Once the cluster is removed, locate the burnt-out bulbs, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the cluster, reconnect the battery, and check that the new lights are functioning.
possible altanator
The door relay on a 2002 Chevy Express van is typically located in the under-hood fuse box. To access it, open the hood and locate the fuse box, which is usually positioned near the battery. The relay for the door locks or lights can be identified by consulting the diagram on the fuse box cover or the vehicle's service manual for specific relay positions.
Yes, you can jump start a 2002 Chevy Malibu. Remember to connect the right connections in order to preserve your battery.
Group size 75 or 78.
To replace the alternator on a 2002 Chevy Express van with a 4.3-liter engine, first disconnect the negative battery cable. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Carefully disconnect the electrical connectors and remove the alternator from the engine bay. Install the new alternator by reversing these steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.