To obtain a speed pulse you would require a CanBus Unit and connect it to the correct can wires. Usualy the OBD 2 socket. Pins 14(can low) and 6(can high). :)
The speed pulse wire for a 2004 Ford Mondeo is typically a green wire with a yellow stripe. However, it's always best to consult the vehicle's wiring diagram or service manual for accurate information, as colors may vary by model and year. If in doubt, checking with a professional mechanic can ensure proper identification.
To find a speed signal for fitting a taxi meter to a 2011 Ford Mondeo, you can typically tap into the vehicle's speed sensor located on the transmission. This sensor sends a pulse signal related to the vehicle's speed, which can be used by the taxi meter. Additionally, you can check the vehicle's wiring diagrams or consult with a professional installer for specific pin locations and connections. Always ensure to follow manufacturer guidelines and local regulations when installing aftermarket equipment.
ford mondeo no question about it the almer is always so stiff at low speed and vibrates at high speeds
Ford Mondeo was created in 1993.
A Ford Mondeo shakes at a low speed most likely due to warped rotors. When rotors are unevenly worn the surface area will not remain balanced. This then results in a shaky ride.
it's non-adjustable
at least on 1,6 l model it is 180 km or 108 mph
The maximum speed of the 2016 Ford Mondeo varies depending on the engine variant. Generally, the top speed for most models is around 130 mph (210 km/h). However, it's essential to note that actual performance can be influenced by factors such as vehicle condition and load.
Ford Mondeo sales were high in 2002. Ford Mondeo was the fifth highest selling car in the entire UK in 2002.
I assume that this is a petrol engined Mondeo The Mondeo's idle speed is controled by a sealed air system Most erattic idling problems are caused by an air leak somewhere in the system.
old ford mondeo its classic about 120 or 140
a ford mondeo st by 70mph