answersLogoWhite

0

The door is located behind the glove compartment. Remove the compartment and the ashtray. You will see a small white square box with an electrical wire connection. Its located there

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why is the Heater stuck on high temp on a 2001 mercury sable?

This sounds like a temperature blend door problem - with the door stuck in the heat position. See "Related Questions" below for information on Taurus/Sable blend door actuator motors and blend doors


Temperature blend door mercury sable 1997?

There are 2 common questions relating to the temperature blend door on a Taurus / Sable:What moves themHow to replace themThe "Related Questions" below address both


How do you change the temperature control on a 2001 Ford Taurus?

If "temperature control" means the device that adjusts the heating/cooling temperature, that would be the temperature blend door actuator motor.See "Related Questions" below for more about that and other Taurus / Sable heating problems and fixes


Location of blend door actuator 1995 Ford Taurus?

The little motor that drives the temperature blend door is pretty much behind the radio.See "Related Questions" below for lots more about replacing it, and volumes of additional information about Taurus Sable heating systems & fixes


Where is the temperature blend door actuator located on a 2000 Ford Taurus?

The temperature blend door actuator on a 2000 Ford Taurus is located behind the dashboard, specifically on the passenger side. It is mounted to the HVAC housing and can be accessed by removing the lower dashboard panel. The actuator controls the flow of air between the heater core and the air conditioning system to regulate cabin temperature.


Any known issues for no-heat problems in a Taurus - Sable - 2003 24v DOHC?

Yep - 3 of the most common are:Temperature blend door actuator motorClogged / failed heater core - engine cooling systemBroken temperature blend doorSee "Related Questions" below for extensive coverage of these and other possibilities


What would cause the temperature control to not work on a Taurus - Sable?

I have a 1997 Ford Taurus that would only blow cold air, I replaced the thermostat and no heat. We flushed the system from a ford dealer no heat. Had to replace the heater core plenty of heat now. Other possibilities are: * a malfunctioning temperature blend door * Plugged heater core See "Related Questions" below for more


How do you replace blend door 1999 sable?

The Sable uses the same HVAC system as the Ford Taurus. Replacement of the door by the dealer involves removing the dash, evacuating the AC and coolant systems and replacing the plastic door with another plastic door that will also break over time. HeaterTreater is the world's leader in aftermarket blend door fixes and has a kit for an easy inexpensive repair for the Mercury Sable. Diagnostic information and pictures are available on the Mercury Sable HeaterTreater Ebay listing or on the web site at www.heatertreater.net.cgallen ----Be sure to review the Related Questions below for much more information & options when dealing with Sable/Taurus heater problems.


How a blend door works 2002 mercury sable?

In a 2002 Mercury Sable, the blend door controls the temperature of the air entering the cabin by regulating the mix of hot and cold air. It is typically operated by an electronic actuator or a cable connected to the climate control system. When the driver adjusts the temperature setting, the actuator moves the blend door to allow varying amounts of heated air from the engine and cooler air from the AC, thus achieving the desired cabin temperature. If the blend door malfunctions, it can lead to inconsistent or incorrect temperature control inside the vehicle.


Where is the temperature blend door on 1999 ford taurus?

It's buried in the dash near heater core, almost impossible to get to.


Where is the air damper on a 1999 sable?

If this air damper is referring to the the heating/cooling temperature blend door... See "Related Questions" below


1998 Taurus - Sable heater blows no hot air out and there is a clicking sound when heat is on?

1) blend door actuator motor has failed2) a broken blend door itselfHope it's #1 as that's cheap and easy.See "Related Questions" below for more about each