On the 3.5 engine, the valve is at the right back of the intake. On the 2.7 the valve is on the left front of the intake.
The PCV valve on a 99 GMC Yukon is found in the left valve cover. It allows trapped gases inside the engine to be recirculated and reused.
To replace the PCV valve on a 1996 Chrysler LHS with a 6-cylinder engine, first, locate the PCV valve, which is typically found on the valve cover or near the intake manifold. Disconnect the vacuum hose attached to the valve and then twist and pull the old PCV valve out of its socket. Install the new PCV valve by pushing it firmly into place, reconnect the vacuum hose, and ensure everything is secure. Finally, start the engine to check for proper operation and any potential leaks.
passenger side valve cover
I would say that my 1998 S-10 does not have a PCV valve, at all, anywhere.
The PCV valve is located in the engine area on the 99 Volvo S80T6. It is important to carefully study the user manual which has an illustration of the same.
On a 1994 Chrysler LHS, the PCV (Positive Crankcase Ventilation) valve is typically located on the valve cover. You can find it on the driver’s side, near the rear of the engine. It may be attached by a grommet and connected to a hose that leads to the intake manifold. Make sure to check the engine bay for any specific diagram if needed.
The PCV Valve is located on the top right of the engine, which connects a tube from the intake manifold to the head of the engine. IT IS NOT THE ONE THAT CONNECTS TO YOUR INTAKE!!! ..
Remove the transmission oil pan and valve body.
The PCV valve is attached to the intake by a hose and is located in the valve cover held by a plastic retainer on the passenger side of the engine near the power steering reservoir.
Mine's on the drivers side valve cover, towards the firewall.
on 99 models with 1.8 liters on top of engine in center of valve cover
On the top of the valve cover on the drivers side of the engine , near the rear of the valve cover