the thermostat is underneath the manifold, follow the top radiator hose and unbolt the manifold. fairly simple.
The oil pan is bolted to the bottom of the engine
under drivers side dash
Yes, with 14 inch wheels.
usually this is caused by a burnt out bulb, or one that is about to go
It is on the frame rail in front of the passengers rear tire.
I suggest u buy a book for your car at the auto parts store for about $20- it will help with all repairs and maintenance 4 your car.You can follow the radiator hose to it also.
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
The spark plug gap for a 1988 Mercury Topaz 4-cylinder is typically 0.044 inches (1.1mm) as per the manufacturer's specifications. It is important to consult the vehicle's owner's manual or a reputable automotive guide to confirm the correct gap for your specific engine model.
On the Firewall
To change the thermostat on a 1988 Mercury Tracer, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one (ensuring the gasket is properly seated), and reassemble everything in reverse order, topping off the coolant and reconnecting the battery when done.
connected to thermostat housing
inside of the tank