Just follow the top radiator hose to the engine and you will see were it clamps onto the thermostat housing. Remove the 2 bolts in the housing and take housing off and the thermostat is right there.
Need to drain engine coolant first. BE SURE ENGINE IS COLD.
The thermostat is located on the engine of a 6.0 vortex 2000 Chevrolet Silverado 2500. The thermostat can be found by following the upper radiator hose directly to the thermostat.
it depends on the engine but check where the lower hose ends closest to the engine
The 1995 Chevy Silverado coolant sensor is located on the front of the engine. The coolant sensor will be a few inches above the thermostat housing.
The thermostat is locating in the waterpump, where the lower rad. hose connects.
Assuming a V8 engine, it's on the top, front of the engine. The thermostat housing is where the top radiator hose goes into the engine.
Follow the upper radiator hose back to the engine, it is connected to the thermostat housing on the engine. The thermostat is located under the thermostat housing.
The thermostat on a Chevy 2.2 engine should be located under the top hose inlet. The top hose as well as the inlet need to be removed to get to the thermostat.
There are many on the engine
The thermostat is located in the thermostat housing at the engine end of the top radiator hose.
The engine thermostat, on a 2008 Chevy Impala 3.5 V6, is located on the lower front side of the engine. The thermostat will have a water hose going into the top of it.
The spring goes down in the engine
The 1981 Chevy Malibu 350 engine thermostat is located on the front of the engine. You can follow the water supply hose from the radiator to the thermostat.