Should be under the front passengers seat along with the jack. Look under the passenger side carpeting for extensions for the jack...
I own a 2009 Jeep Wrangler X and actually just had to change a flat. In the trunk of your jeep there will be a long lug nut "wrench" that was made specifically to remove the nuts that hold all of the tires on. Simply use this tool to remove the nuts on the spare tire and you are all set!
With a scan tool or a battery disconnect.
The dealer can do that with their scan tool.The dealer can do that with their scan tool.
With a scan tool or with a battery disconnect.
A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.
After fixing the cause of the trouble code, you clear code with a scan tool.
A clutch kit, which includes the clutch disk, pressure plate (cover), throwout bearing, thrust bearing, and an alignment tool, will cost about $120 at Autozone, Advance Discount, or Amazon.com.
On the 2008 Jeep Grand Cherokee Laredo, the spare tire is located underneath the rear of the vehicle. It is secured to the undercarriage and can be accessed by removing a cover and using a crank tool provided in the vehicle. To lower the spare tire, you'll need to use the tool to release it from its mount.
The distributor is set to 0 degrees with a scan tool. You cannot do this with a timing light.
Timing is not adjustable. The distributor or cam sensor is synched to the crankshaft sensor with a scan tool.
A Wrench!! takes awhile and it is cramped but that is the way to do it!
The distributor is synched to zero degrees with a scan tool, it is not done with a timing light.