The torque converter is between the engine and transmission.
The torque converter is between the engine and transmission.
84 inch pounds or 7 ft pounds.
how to drai torque converter on 1999 chevy blazer
what transmission is in it?? turbo 350??? My 82 firebird has roughly the same size torque converter and should hold around 4 liters. make sure you flip the torque converter on its side after you put some in so it drains into the sides of the converter, put another liter in and do the same. if you have any other questions email me at aka_sparxxx@hotmail.com
Here is a link regarding Torque Converter http://www.autoshop101.com/forms/AT02.pdf
Inside the transmission. It is what connects to the torque converter.
Not sure what you are asking, the front seal is what the torque converter slides into.Not sure what you are asking, the front seal is what the torque converter slides into.
The torque converter on a 1999 Mercedes SLK230 is located within the transmission assembly. It is situated between the engine and the automatic transmission, specifically bolted to the flexplate of the engine. To access the torque converter, the transmission typically needs to be removed from the vehicle. Always refer to a service manual for detailed instructions when working on transmission components.
yes you should or have it rebuilt any contaminants from the torque converter went into the transmission..not unless you want to do it again soon
front of the transmission--between engine and transmission
Right behind the motor in the front of the transmission.
118 ft lbs 1997-2004 Buick LeSabre
Its the code for the torque converter clutch solenoid.