It is on the center of the rear of the transfer case.
No. Automatic transmission fluid is the recommended fill.
The side of the transfer case facing rear will have a fill plug about half way up.
30 mm socket
17mm allen wrench, the transfer case takes a 10mm allen.
The fill plug is on the center of the rear of the transfer case.
transfer case
On the back of the case there are two plugs that take a 10mm Allen wrench to remove. The top of the two is the fill plug, fluid should be level with the bottom of the hole.
Fill plug is located on the center rear of the transfer case.Fill plug is located on the center rear of the transfer case.
To fill the transfer case in a 1996 Toyota RAV4, first ensure the vehicle is on a level surface and the engine is off. Locate the fill plug on the transfer case and remove it using the appropriate tool. Using a fluid pump or a squeeze bottle, fill the transfer case with the recommended type of gear oil until it starts to flow out of the fill hole. Finally, replace the fill plug securely after filling.
The fill plug is on the left side of the transfer case. You remove the fill plug, and the fluid should come to the bottom of the fill plug.
To fill the transfer case on a 1998 Honda Passport, first ensure the vehicle is parked on a level surface and the engine is turned off. Remove the fill plug, typically located on the side of the transfer case, using a socket or wrench. Add the recommended transfer case fluid until it starts to seep out of the fill hole, indicating it's full. Finally, replace the fill plug securely to prevent leaks.
Full it until it starts drizzling out of the fill hole on the transfer case.