The transmission dipstick is located on the left side of the engine/transmission, just inboard of the brake master cylinder, just in front of the firewall. It's buried down below several hoses, but the handle is painted yellow. You may find it useful to use one of the extra-long needle nose pliers you can buy at any auto parts store (I've found the ones with the "bent" nose best for the job.) You definitely will have to use a long, slender funnel if you need to add fluid. Make sure you get the dipstick fully seated when you replace it!
it is located where the transmission is and is very easy to change. on a 2000 ford contour that is.
yellow handle. below the throttle near the brake master cylinder
First of is it a 4 or V6???
Your 2000 Ford Contour cannot reverse because of a transmission failure problem.
The 2.0 L - DOHC - 4 cylinder engine in a 2000 Ford Contour has a timing belt
According to the 2000 Ford Contour Owner Guide : For the manual transaxle ( transmission ) ( 2.0 U.S. quarts of Motorcraft MERCON automatic transmission fluid )
ransmissionfilter fordcontour
A 2000 Ford Contour ( in North America ) Has either a 2.0 litre four cylinder or a 2.5 litre V6 engine
The Ford Contour was produced from the years 1995 to 2000. The front pump transmission seal in a 1998 Ford Contour is located very close to the camshaft.
According to the 2000 Ford Contour Owner Guide : The 5 speed manual transaxle ( transmission ) takes : ( 2.0 U.S. quarts of Motorcraft MERCON automatic transmission fluid )
( No ) the 2.5 liter V6 engine in a 2000 Ford Contour has ( 2 timing CHAINS , 1 CHAIN to each cylinder head )
stick