on top of the transfer case output shaft housing. should be held in by a ten mm bolt.
To replace the speed sensor on a 1995 Chevy Tahoe, first, ensure the vehicle is safely elevated and secured. Locate the speed sensor on the transmission; it typically has a wiring harness connected to it. Disconnect the wiring harness and remove the sensor by unscrewing it from the transmission. Install the new sensor by reversing the process, ensuring it is securely fastened and the harness is reconnected.
It is screewed into the transfur case.
That is the anti locking brake sensor / wheel speed sensor
The 2005 Chevy Cavalier vehicle speed sensor is located on the back of the transmission. The vehicle speed sensor will be in the upper right-hand corner of the transmission back.
The VSS sensor is the vehicle speed sensor and it is located in the transmission. The purpose of it is to operate the speedometer and abs system.
The vehicle speed sensor, on your 1994 Chevrolet Silverado pickup truck, is located on the back of the transmission. The speed sensor is labeled as such.
It means some one has programmed a speed limit in the vehicle. If the vehicle exceeds the preset speed it will warn you to reduce speed.
It has 1 vehicle speed sensor bolted in the tail shaft of the transfer case. It has 2 wheel speed sensors in behind the front rotors too. 1 on each side.
How far off is it? Did you change tire/wheel size? Bad speed sensor.
A vehicle speed sensor is the culprit
No it does not.
The Chevrolet Lumina speed sensor can be found on the back of the transmission. The exact position of the speed sensor is dependent upon the year of the automobile.