0
Open the hood. Facing the engine from the front of the card, look on the left side of the card...near the cooling system overflow bottle. To the right of the area is the drive belt. In the lower area you will see the two hoses for the cooling system fluids that connect to the water pump. The drive belt goes over a pulley that drives the water pump.
What else can I help you with?
Where is the thermostat on a 1993 Oldsmobile cutlass ciera s located?
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
Where is the water pump on a 1995 olds cutlass supreme?
Where is the water pump on a 1995 olds cutlass supreme?"
Where is the thermostat located on a 1996 Oldsmobile Cutlass 3.1L?
It is located in the water outlet which is attached to the bottom end of the top radiator hose. Mark
Where is the water pump located on a 1998 Oldsmobile cutlass?
The water pump on this model is located on the top of the engine to the side with the serpentine belt. Its pulley will be the one with the smooth wheel
Where is the thermostat in a 1999 Oldsmobile Cutlass located?
Follow the top radiator hose down to the water outlet on the engine; the stat is in there.
How do you get into a window motor on a 97 Oldsmobile Cutlass Supreme?
Take the inside door panel off and the water deflector paper and you will be able to see the window motor.
Why is my 96 Oldsmobile cutlass supreme overheating when idling?
Low coolant? Cooling fan not working? Water pump not circulating water? System airbound? Radiator plugged or restricted? Thermostat not fully opening?
Where is 1986 Oldsmobile cutlass ciera water pump at?
It varies by engine.
Where is the water pump in your 94 Oldsmobile cutlass ciera?
On the front of the engine.
How do you replace water pump in 1986 Oldsmobile cutlass supreme?
To replace the water pump in a 1986 Oldsmobile Cutlass Supreme, first disconnect the battery and drain the coolant from the radiator. Remove any components obstructing access, such as the serpentine belt and the alternator, if necessary. Unbolt the water pump from the engine block, clean the gasket surfaces, and install the new pump with a new gasket. Reassemble all components, refill the cooling system with coolant, and check for leaks after starting the engine.
How do you remove the water pump pulley on a 1985 Oldsmobile cutlass ciera?
pulley puller
Where is the water pump located on a 1999 Oldsmobile Cutlass?
It depends on what engine you have. They are all on the front of the engine some are under the timing cover. Get a manual on your car from the parts store.
