0
Follow the upper radiator hose back towards the engine. The hose will be connected to the thermostat housing. The thermostat is under the housing. Drain off some colant, remove upper hose from thermostat housing, remove the two bolts holding the housing to the engine, remove the housing, remove the thermostat, take note that the thermostat spring faces the engine so as not to install backwards.
What else can I help you with?
Where is the ECM located in a 1992 Chevy S10 blazer?
The ECM on a 1992 S10 Blazer is located below the glove box.
Where is 1994 Chevy blazer s10 coolant temp sensor?
On the 4.3L it is located next to the thermostat housing. The electrical plug to it has two wires.
What is the original temp of a s10 Chevy blazer 2003?
It should have a 195 degree thermostat.
Where is the fuel pump fuse located on a 93 S10 Blazer?
which fuse is for the fuel pump in a 1993 chevy s10 blazer
Where is ecm located 86 s10 Chevy blazer?
under the dash
Where is the fuel pump located in a 2001 Chevy s10 blazer?
In the fuel tank
How do you find a thermostat in a 96 s10 Chevy blazer?
Follow the upper radiator hose from the radiator to the engine. It is attached to the thermostat housing. Removing the thermostat housing will expose the thermostat.
Where is air diverter for 2004 Chevey Blazer located?
Where is diverter that controls air direction located in a 2004 Chevy S10 Blazer?
Where is evap canister located on a 1996 Chevy s10 blazer?
Where is evap canister located on a 1996 chevy s10 blazer? It should be found above the rear axle on the drivers side, mounted to the inside of the frame rail.
Where is the electronic flasher located on a 1996 Chevy blazer?
In our 96 Blazer S10, it was behind the radio. We had to remove the radio to get to it.
Will an alternator from a 2000 Chevy blazer fit a 2002 s10 blazer?
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
Where is the thermostat located on 95 s10 blazer?
Follow the upper radiator hose to the engine, the thermostat is under the housing the hose connects to.
