There are several sensors on this transmission.
This question has no correct answer as there is no Transmision sensor.
no 120,000
T-IV for an automatic.
The TCC (Torque Converter Clutch) sensor on a 2006 Saturn Ion is typically located on the transmission. Specifically, it is often found on the valve body or near the transmission control module. Accessing it may require removing certain components for better visibility and reach. Always consult a service manual for precise locations and procedures.
The 2004 Saturn Ion typically comes with a four-speed automatic transmission or a five-speed manual transmission, depending on the specific model and options chosen. The automatic transmission is designed for ease of use, while the manual transmission offers a more engaging driving experience. Both transmissions are paired with a 2.2-liter four-cylinder engine.
There is a black fill plug on the very top of the transmission. It is below a wiring harness and an AC line (I Believe).
No, the 2007 Saturn Ion does not have a transmission dipstick. It is equipped with a sealed automatic transmission system, which means that the fluid level is not intended to be checked or serviced by the vehicle owner. If transmission fluid checks or changes are needed, it is recommended to take the vehicle to a qualified mechanic.
All automatic transmission vehicles use a torque converter.
if it is an automatic you cant yourself it is a closed system. if it is a manual i dont know.
There is a five speed manual, 1 speed ctv, and a five speed automatic.
in the exhaust manifold or before the catalic converter
On a 2004 Saturn Ion, the automatic transmission refill plug is located on the side of the transmission case. To access it, you'll need to locate the transmission fill tube, which is typically near the front of the vehicle, and the plug itself is usually a hex or bolt type. Make sure the vehicle is level and the engine is running when checking or refilling the transmission fluid. Always consult the owner's manual for specific instructions and safety precautions.
The IAT intake air temperature sensor is located in the breather tube about 4 inches from the air filter box TWo wire plug in the tube connects to the sensor