Probably as close to the cab as you can. Or for simplicity, get a TomTom.
Too many things could go wrong if something's not hooked up right. And it would likely void the warranty.
L/H side of truck under hood near the fire wall there are several plugs on top of the front left tire wheel well. The aft plug (nearest the firewall) will have a Gray wire with a black stripe this is the speed sensor wire.
This is not standard equipment. There is a dealer installed option to include a "backup sensor" (Part # 08V67-STX-210B). It costs almost $600 with installation.
To ensure the proper installation of a garage door sensor, carefully follow the manufacturer's instructions, securely mount the sensor at the correct height, test the sensor to ensure it is working correctly, and regularly maintain and check the sensor for any issues.
it is located on the head
There is no sensor by this name in a toytota. The Toyota air/fuel sensor is also known as the upstream air/fuel sensor. The Toyota downstream sensor is also known as the downstream O2 sensor.
where is the cam sensor located on a 2003 ford crown vic
Disconnect the electrical connector, then unscrew the sensor. Installation is the reverse.
its right on the airfilter box on the top of it
No, not and keep all your equipment the same. The crank sensor determines spark and fuel injector timing along with the cam sensor.
The equipment and materials required to make your own motion sensor far exceeds the cost of purchasing one off the shelf.
In my Honda Odyssey (2000), the door is located on the front of the navigation unit DVD unit under the passenger seat. If this door is left open, or if the door sensor pin on the door is broken, the navigation system will not function
Assuming that the brake pads were just changed and the sensor is still on, Perhaps the sensor wire was broken during installation causing the sensor to stay on. Happened on my 2001 a4.