answersLogoWhite

0

What else can I help you with?

Related Questions

How do you replace a license plate bulb on a 1998 Chevy Prizm?

To replace the license plate bulb on a 1998 Chevy Prizm, first, locate the license plate light housing at the rear of the vehicle. Use a flathead screwdriver to gently pry off the plastic cover or twist the housing counterclockwise to remove it. Once the housing is out, pull out the old bulb and insert a new one, then reassemble the housing by reversing the removal steps. Finally, test the new bulb to ensure it’s working correctly.


How do you put a front license plate on a 1995 geo prism?

i have a 95 Prizm and i just bolted the plate to the bumper. it does the same the as a bracket. but it cost no money.


How do you change the license plate bulb on a 2001 Geo Prizm?

The light is held by clips. You can remove the housing by using your fingers or a small screw driver. Once you have the housing out, you should be able to easily replace the light bulbs. The bulbs come in pairs and cost about 5 bucks.


How do you replace license plate light bulb on a 95 geo prizm?

there will be two. there will be a tab on the side of the black bracket, push the tab to the side the bracket will come out. then twist the light socket pull it it ant the pull out the bulb then but in the new. same for the other one. the bulbs are 1.74 for two at wal mart.


How do you replace the dome light on a 1995 Geo Prizm?

you pop the clear plastic off on the side of the swith and replace the light... close by putting the opposite end first and the clicking it in by the switch. thank you


Where is the heater core located on a 1996 geo prizm?

The 1996 Geo Prizm heater core is located behind the kick plate on the passenger side of the passenger compartment. The kick plate will need to be removed in order to view the heater core.


How do you remove the taillight assembly on a 1996 Geo Prizm there is a black plug inside the trunk that is preventing be from removing the assembly?

On my 94 Prizm, that plastic plug has an O-ring on the other side of the body, the thing to do is pull the light assy straight back, maybe by leveraging a flat screwdriver where the light assy has curved around to the side of the rear. Then you clearly see how it goes back on and how leaving out one screw can really screw things up, I almost cut that plastic nut.


Where is the fusebox located in a 1994 Geo Prizm LSI?

I have a 1993 Geo Prizm, and there is a fuse block is located to the left of your left leg; on the plastic panel. There is a pull out access door there.


How do you replace the license plate bulbs on a 1992 Geo Prizm?

Reach under the bumper cover , and you should feel the wires feel around once you have located the end of the socket twist it and the socket will fall down, then pull the bulb straight out, repeat with the other side


Why would the battery light and the brake light both be on on a 1990 geo prizm?

because you ugly alternater.


Does the open door light drain the battery on an 1995 geo prizm?

yes


How do you change the third brake light on a '95 GEO Prizm?

From inside the trunk.