try yearone.com or manciniracing.com
To replace the windshield wiper linkage bushings on a 2002 Ford Ranger, first, remove the wiper arms by loosening the nuts and lifting them off the posts. Next, remove the plastic cover from the base of the windshield to access the linkage. Disconnect the wiper linkage from the motor and the windshield frame, then replace the worn bushings with new ones. Reassemble everything in reverse order, ensuring all connections are secure before testing the wipers.
The wiper linkage is bad. Or the wiper arm stud bushings (where the arms attach to the cowl) are rotted out.
The linkage bushings are worn/missing/broken or the wiper arms are not timed properly to the wiper transmissions.
Under the black cowling at the base of the windshield.
All 1996-2000 Plymouth Voyagers take 28" replacement windshield wiper blades on both sides front.
Linkage bushings on wiper arms coming off back side of wiper motor under cowling
Use a measuring tape! Or take them off and compare... Seriously?!
If its like a 96 you remove the windshield wiper motor and assembly
How do I replace the windshield wiper switch?
The linkage is connected by plastic bushings and with age they deterioate.
there was a factory recall on one of the wiper motors.
The 1997 Dodge/Plymouth Neon takes 21" drivers side and 18" passenger side replacement windshield wiper blades.