Thermostats install into the housing with the spring-side towards the engine.
See "Related Questions" below for more about Taurus / Sable thermostat installs.
Carol Sable goes by Sable.
the spring should always go to the inside of the engine
The end of the thermostat with the spring faces into the engine.
Probably the quickest way is to pick up the phone and call them.
On a 2000 Mercury Sable, the thermostat is typically located at the engine end of the upper radiator hose, where it connects to the engine. To access it, you may need to remove the upper radiator hose and the thermostat housing. Ensure the engine is cool before attempting to locate or replace the thermostat to avoid burns or injury.
locate the thermostate on the lower rad hose as it enters the engine block. Remove the 2 thermostate mounting bolts and remove the circular thermostate. Installation is the reverse of removal. Ensure you obtain a new gasket prior to installing the new thermostate.
They don't have one. The CTS is located on the thermostate housing.They don't go bad.
Rena Mero goes by Sable.
change the thermostate
"Sable" does not have a prefix.
you have to go to Petalburg city and talk to the old man who lives at the docks at the shore and ask to go to Dewford.When you are there, you go north until you reach the north beach and go east.There will be a cave.go in. Then you will have to east again and there will be a hole with a ladder in it. Go down the hole and start runing everywhere until sable eyes appears. it will take some time but eventually sable eyes will appear.
Sara Jecko goes by Sara-Sable.