The side that has pressure in most cases.
The lip on the seal always goes towards the pressure are the fluid.
Is it the bottom seal or top seal? Bottom seal- drain oil, remove spark plug boot, remove blade and clean shaft, place the tip of a small screwdriver at the o.d. of the seal and use a hammer to tap the screwdriver into the seal and pry out. to install- lube the inner lip of the seal, set it level into the opening and gently tap the outer edge of the seal with a brass punch and hammer or use a soft face hammer until the seal is in all the way. Make sure not to drive the seal in unevenly you will damage the seal. To do the top seal you will do the same to get the seal out and in but you will have to remove the engine flywheel.
The correct term is 'Migrated', and no. I had my lip pierced for a year and it never came out of my face or anything. The only way that thing would come out is if someone ripped it out. (Ouch).
my lip piercing is in the center of my lip and it never gets in the way of anything....lol i had the typical hoop on the side of my lip and it got in the way of EVERYTHING! and was just uncomfortable.
Most find that rubbing extra virgin olive oil across their lips is a good, natural way to remove lip-gloss stains. It also helps moisturize them, as well. In fact, it should remove any trace of make-up wherever it is applied! Face and all.
east
Either way
not really you should do it face to face or by email
The same way he talks to you face-to-face. And politely.
Which ever side you want really. Bangs don't really affect the way it looks. Won't be cluttered or anything. If you plan on getting lip piercing/eyebrow piercing, get it on the opposite side of that.
During the band's 4:25pm set on the Warped Tour second stage (The venue's main stage), he accidentally smashed his face in with the microphone.
The best way is to do a biopsy. But a bump on the lip can be many things.