fsbefbadfbadfbadbabad
yes. they sell them on the internet
2004 sebring convertable cruise control not working - what to do?
To install cruise control in a 2004 Jeep Liberty that didn't originally have it, you will need to purchase a compatible aftermarket cruise control kit. Begin by disconnecting the battery, then follow the kit's instructions to mount the control switch on the steering wheel or column. Next, connect the necessary wiring to the vehicle's throttle and brake systems. Finally, reassemble and reconnect the battery, ensuring the system functions properly.
In the 2004 fuse panel
The Apprentice - 2004 Cruise Control 5-5 is rated/received certificates of: Australia:PG
yes
The engine computer controls the cruise.
On a 2004 Mercury Mountaineer, the cruise control system is typically protected by a fuse located in the fuse box. Check the owner's manual for the exact fuse number, but it is often labeled as "Cruise" or similar. If the cruise control is not functioning, inspect this fuse and replace it if it is blown. Additionally, ensure that the other components related to the cruise control system are functioning properly.
Make sure you have the main cruise control button depressed. You will then see a display light indiciating "Cruise Control". After that, just use the normal buttons to set, accelerate, and coast. BEWARE, though. The cruise control button for our 2004 Accord stopped letting me keep it in the depressed position, and I can't keep my cruise control on now. Will let you know once the mechanic takes a look at it.
The three buttons on the right side of the steering wheel are your cruise control buttons. On, off, and reset.
Yes.
If the car is equipped with cruise control the on/off switch in mounted to the steering wheel, left side of the horn