0
What else can I help you with?
Why are the front wheels wider than the rear?
Chevy done that on 4-wheel drives so when your off road with it the rear wheels are always grabbing a couple inches of un touched ground where the front wheels did not touck. That is called tracking. It's so the rear wheels don't run in the same place that the front wheels run. Better traction.
Where is the rear axle on a 1999 Dodge Dakota?
It is what the rear wheels bolt to.It is what the rear wheels bolt to.
When acceleration is applied weight is transferred to the?
When acceleration is applied, weight is transferred to the rear of the vehicle. This shift in weight helps improve traction on the driving wheels, allowing the vehicle to accelerate more efficiently. It can also lead to better stability and control during acceleration.
Why do the front tires stick out wider than the rear?
That is how GM. built it so when you are off road with it, all 4 wheels don't run in the same place. The rear tires are always grabbing untouched earth and it pulls better when in the mud. Good Ideal don't you think.
In a right turn, where will the rear wheels track in relation to the front wheels?
In a right turn, the rear wheels will track inside the path of the front wheels.
When weight transfer occurs in a front-wheel drive car during acceleration does this mean that the rear of the car becomes heavier than the front?
During forward acceleration on any vehicle (front wheel drive or otherwise), more of the vehicles weight is transferred to the rear of the car, making the rear of the car heavier. This is undesirable in a front wheel drive car because there is less weight over the drive wheels to produce traction (causing the front wheels to spin)
Where are the Chevy van tire jack points?
Side of van along the frame Behind front wheels and in front of rear wheels Side of van along the frame Behind front wheels and in front of rear wheels Side of van along the frame Behind front wheels and in front of rear wheels
Is slight acceleration helpful in over steering situations?
Yes, slight acceleration can help to shift the weight of the vehicle to the rear wheels, which can improve traction and help to regain control in an oversteering situation. However, it is important to be cautious and not accelerate too aggressively, as this can exacerbate the oversteer.
When and how does friction affect the acceleration of a balloon racer?
Friction affects the acceleration of a balloon racer by creating a force that opposes the motion of the racer. Higher friction between the racer's wheels and the surface will result in a lower acceleration, as more energy is needed to overcome this resistance. Reducing friction by using smoother wheels or lubricants can improve the acceleration of the balloon racer.
What connects 2 wheels in a car?
On the rear wheels, it's the axle.
What is rear wheel skid cause?
A rear wheel skid occurs when the rear wheels of a vehicle lose traction, typically due to excessive acceleration, sudden braking, or sharp turns. This can be exacerbated by slippery road conditions, such as rain or ice, which reduce tire grip. When the rear wheels skid, the vehicle may lose stability and can start to spin out, making it difficult for the driver to maintain control. Proper driving techniques and vehicle handling can help prevent rear wheel skids.
What is rear wheel?
The wheels at the back.
